Aquagum P/030
Single-component water-based polyurethane adhesive. Excellent thermal resistance, low reactivation temperature. Specific for gluing natural or synthetic soles on leather, including greased, fabric and synthetic uppers. In the presence of difficult gluing or very oily leathers, it is recommended to add 5% CAT/1598 activator to the adhesive.

Aquagum P/035 R
Single-component water-based polyurethane adhesive. Excellent thermal resistance, low reactivation temperature. Specific for couplings of various kinds of synthetic materials such as PVC and PU and natural, with each other. More fluid than P/030, it has incorporated the activator which increases its resistance to aging and heat.

CAT/1598
Catalyst for Aquagum adhesives.

Fraboclor
Ready-to-use halogenating mixture. Suitable for tires and TR.

Frabodur E/462S
Hardener for polyurethane and polychloroprene adhesives, neutral colour, economic type.

Pivigum 1039
Single-component polyurethane adhesive. Good thermal resistance. Specific for bonding natural and synthetic materials. Suitable for low absorbent substrates. For particularly demanding bonding, the addition of 5% activator is recommended.

Pivigum 1039/NF 40
Single-component polyurethane adhesive. Good thermal resistance. Specific for bonding natural and synthetic materials. Suitable for very absorbent substrates. For particularly demanding bonding, the addition of 5% activator is recommended.

Polvere Alogenante
Active principle in powder form to be mixed with Solvent ACL to obtain a particularly active and aggressive halogenating mixture. Specific for tires and TR.

Pression 2811
Very clear single component polychloroprene adhesive. Good thermal resistance and a quick initial setting. Specific for gluing particular types of leather to plastic materials.

Pression CPE/195
Polychloroprene adhesive with rapid setting and high fluidity. Good thermal resistance.

Pression MG/2000
Single-component polychloroprene adhesive. High thermal resistance and a quick initial setting. Specific for difficult gluing of leather, tunith, microporous and coria soles on leather and fabric uppers. Suitable for application with a roller machine for low absorbent substrates.

Pression PMC
Solvent-based polychloroprene adhesive, specific for bonding panels in phenolic material in the production of pre-insulated ducts for air distribution. Excellent spreadability and high thermal resistance.

Pression TR/62
Polychloroprene primer designed to be applied as a substrate on particularly absorbent substrates of microporous, expanded EVA or synthetic materials in general before spreading the adhesive used for gluing. In the presence of particularly difficult gluing such as synthetic fabrics and expanded EVA , the addition of 5% activator is recommended.

Pression Vulkaprene
Polychloroprene adhesive, to be used with 8% activator. High thermal resistance. Good yield and fluidity. Also for absorbent materials.

Pression Vulkaprene 075 F
Single-component polychloroprene adhesive. High thermal resistance, strong initial grip. Specific for bonding soles in synthetic and natural rubber, leather, tunith, microporous and coria together, or on leather uppers, including greased ones, and fabric. Particularly suitable for low absorbent substrates. In the presence of particularly difficult gluing or oiled leathers, it is recommended to add 5% activator to the adhesive.

Pression VULKO 3
Two-component solvent-based polychloroprene adhesive, specific for bonding hypalon neoprene fabrics to itself or to fiberglass in the manufacture of inflatable boats. Light color and excellent spreadability. Good thermal resistance.

Primer PIVIGUM
Polyurethane primer to be used as a first coat on very absorbent substrates before spreading polyurethane adhesives.

Primer PRESSION
Polychloroprene primer applied as a substrate on welts or particularly absorbent supports of salpa, hide, coria, microporous or synthetic materials in general before spreading the adhesive used for gluing. In the presence of particularly difficult gluing such as heavily oiled leather or synthetic fabrics, the addition of 5% activator is recommended.

Pulitore Spray per AQUAGUM
Specific product for cleaning dry residues of Aquagum family adhesives on rigid substrates in general.

Superpivigum
Two-component, solvent-based polychloroprene adhesive, specific for bonding PVC and polyurethane coated fabrics to themselves in the manufacture of inflatable boats and nautical items. Light color and long stickiness. Good thermal resistance.

Aquagum P/4922
Single-component cold water-based polyurethane adhesive, specific for coupling natural and synthetic materials of various kinds.

Aquagum P/031 LR
Single-component water-based polyurethane adhesive. Excellent thermal resistance, good penetration on substrates. To be used as a primer for gluing natural or synthetic soles on leather, including greased, fabric and synthetic uppers.

Aquagum P/075
One-component water-based polyurethane adhesive thicker than P/030 and P/035. Excellent thermal resistance, low reactivation temperature. Specific for gluing natural or synthetic soles on leather, including greased, fabric and synthetic uppers. In the presence of particularly difficult gluing, it is recommended to add 5% of your Cat 1598 activator to the adhesive.

Diluente PIVIGUM
Ready-to-use solution of organic solvents, specific for diluting polyurethane-based adhesives and for cleaning brushes, spreading machines or spray guns that may be dirty with said adhesives. Product possibly also suitable for degreasing metal sheets or various parts before gluing.

Fraboclor E
Ready-to-use halogenating solution, to be used as a primer on synthetic rubber or thermoplastic (TR) rubber soles before spreading polyurethane adhesives.

Pivigum 1033
Single-component polyurethane adhesive. Specific for very demanding bonding of natural and synthetic materials. Very strong initial grip and high thermal resistance.

Pivigum 1039/NF
Single-component polyurethane adhesive. Good thermal resistance. Specific for bonding natural and synthetic materials. For particularly demanding bonding, the addition of 5% activator is recommended.

Pression 2080
Very fast setting polychloroprene adhesive, resistant to very high temperatures.

Pression MG
One-component polychloroprene adhesive. High thermal resistance and a quick initial setting. Specific for difficult gluing of leather, tunith, microporous and coria soles on leather and fabric uppers. Suitable for application with a roller machine.

Pression NTV
Polychloroprene adhesive for very demanding bonding. Excellent thermal resistance and fluidity. Advisable in the presence of very absorbent materials.

Pression TR/60
Polychloroprene adhesive to be used with 5% activator. High thermal resistance. Long stickiness.

Pression TR/65
Two-component polychloroprene adhesive to be used with 5% activator. High heat resistance and strong stickiness. Specific for bonding thermoplastic rubbers (TR), tunith, leather and microporous, to themselves, or to leather, even greased, and fabrics; or for the application of welts of different materials. In the presence of undemanding gluing, the product can also be used as a single-component.

Pression Vulkaprene 075
Mono-component polychloroprene adhesive. High thermal resistance, strong initial grip. Specific for bonding soles in synthetic and natural rubber, leather, tunith, microporous and coria together, or on leather uppers, including greased ones, and fabric. Particularly suitable for low absorbent substrates. In the presence of particularly difficult gluing or oiled leathers, it is recommended to add 5% activator to the adhesive.

Pression Vulkaprene 878
Single component polychloroprene adhesive. High thermal resistance and a strong initial grip. Specific for difficult bonding on low-absorbent substrates of soles in synthetic and natural rubber, leather, tunith, microporous and coria together, or on leather uppers, including greased ones, and fabric. In the presence of particularly difficult gluing, the adhesive can be added with 5% activator.

Primer N/02
Primer for low absorbent synthetic materials. Allow anchoring of normal solvent-based or water-based neoprene or polyurethane adhesives.

Primer PIVIGUM/PG
Polyurethane primer applied as a base coat on particularly oiled leathers.

Primer PS
Primer applied to heels, wedges and polystyrene supports before applying polyurethane adhesives for final bonding.

Solvente ACL
Specific solvent mixture to be added to Halogen Powder to obtain a mixture for halogenating rubber and TR

SuperPivigum E-8399/50
Single-component polyurethane adhesive specific for the assembly, also of synthetic materials, without hot reactivation.

Aquagum P/075 R
Single-component water-based polyurethane adhesive thicker than P/030 and P/035. Excellent thermal resistance, low reactivation temperature. Specific for gluing natural or synthetic soles on leather, including greased, fabric and synthetic uppers. In the presence of particularly difficult gluing, it is recommended to add 5% of your Cat 1598 activator to the adhesive.